Grease Filter Cleaning Service

Grease Filter Cleaning Service


Specifications
Details

Kitchen Duct Degreasing: Grease Filter Cleaning Service by EKG M&E Sdn Bhd

In 2026, a Grease Filter Cleaning Service is the critical first stage of a building's fire prevention and energy strategy. Under the Energy Efficiency and Conservation Act (EECA) 2024 and BOMBA regulations, the grease filter is the "primary separator" of your exhaust system. For F&B outlets in Kuala Lumpur and Selangor, clogged or degraded filters are the leading cause of "Air Starvation" at the hood and excessive energy consumption.

At EKG M&E Sdn Bhd, we apply 34 years of mechanical engineering expertise to provide specialized filter restoration. We ensure your filters perform their mechanical duty—centrifugal grease extraction—while supporting a 5-Star Energy Intensity Label.


1. The Engineering Logic: Restoring Centrifugal Efficiency

Commercial grease filters (typically Baffle Filters) do not act like sponges; they act like centrifuges. As air passes through the baffles, it is forced to change direction rapidly, "slinging" the heavier grease particles onto the metal surface.

  • Lowering the BEI: A grease-clogged filter creates massive static pressure. By restoring the clear air path, we reduce the resistance the fan must overcome. This allows your Variable Frequency Drives (VFDs) to maintain the required capture velocity at lower motor frequencies, directly lowering your Building Energy Index (BEI).

  • Fire Chain Interruption: The filter is the gatekeeper. If it is saturated with grease, it becomes a high-intensity fuel source located directly above open flames. Deep cleaning to a Bare-Metal finish ensures that a flare-up on the stove cannot easily ignite the exhaust plenum.

  • Extraction Performance: Clean filters ensure the mandatory 10 l/s per person of fresh air delivery can be maintained without smoke "spilling" back into the dining area, satisfying DOSH 2026 health audits.


2. The EKG Specialized Cleaning Protocol

We utilize a thermal-chemical process that restores the aerodynamic properties of your filters:

A. Heated Saponification Soak

We utilize industrial-grade, Food-Safe Alkaline Degreasers in heated soaking tanks. This process chemically breaks down the complex "baked-on" grease and carbonized layers that manual scrubbing cannot reach, restoring the original smooth finish of the stainless steel or aluminum.

B. High-Pressure Thermal Extraction

After the chemical soak, filters are subjected to high-pressure thermal flushing (80°C - 90°C). This ensures that the "internal" cavities of the baffle—where most grease is hidden—are completely clear of residue.

C. Frame and Gasket Inspection

During the service, we inspect the structural integrity of the filter frames. Distorted frames allow "unfiltered air" to bypass the baffles, leading to rapid grease buildup in the downstream ductwork. We ensure a tight, flush fit to maintain the fire-safe envelope.


3. Compliance Matrix: Why Professional Cleaning Matters

Requirement Standard Manual Wash EKG Professional Service
Residue Removal Surface Level Only Bare-Metal (Internal & External)
Grease Capture Reduced Efficiency Factory-Standard Centrifugal Flow
Energy Impact High Static Pressure Optimized for 5-Star BEI
BOMBA Status High Risk of Failure Certified for Safety Audits
Documentation None Digital Service & Compliance Logs

4. Why Professional Filter Service is Essential for 2026

  • Annual Fire Certificate (FC) Security: BOMBA inspectors specifically check the "Plenum Zone" behind the filters. We provide the certified service logs and timestamped photos that prove your filters are maintained to MS 1472 standards.

  • Lowering TNB Maximum Demand: By smoothing the air path at the entry point, we reduce the total amperage required by your exhaust fans. This flattens your building’s energy profile and avoids the peak power charges that penalize inefficient infrastructure.

  • Bio-Security & Odor Control (DOSH 2026): Our process eradicates the organic matter that serves as a breeding ground for pests and bacteria. This ensures your kitchen stays below the legal 500 cfu/m³ bacterial ceiling, protecting your brand and occupants.

Why Choose EKG M&E Sdn Bhd?

  • 34 Years of Engineering Depth: Based in KL, we are mechanical contractors who understand the forensics of extraction systems. We don't just "clean"; we ensure your mechanical assets perform at peak efficiency.

  • Turnkey Maintenance Management: We manage the entire lifecycle—from the scheduled night-shift collection to the final "as-cleaned" verification.

  • Digital Twin Ready: We can integrate your filter maintenance records into your building's 3D digital twin, providing your facility managers with real-time visibility of your energy and safety compliance.

Are your grease filters acting as a safety barrier or a flammable energy drain? Contact EKG M&E Sdn Bhd today for specialized grease filter cleaning service and secure the 5-star performance of your infrastructure.


View more about Grease Filter Cleaning Service on main site