Details

---

Air Duct Gap Sealing by EKG M&E Sdn Bhd

In the high-humidity, 2026 regulatory environment of Kuala Lumpur and Selangor, air duct gaps are the primary enemy of the Energy Efficiency and Conservation Act (EECA) 2024. Any gap in your ductwork is a "thermal bridge" that allows 33°C outdoor air to enter and $24$°C conditioned air to escape, directly inflating your Building Energy Index (BEI) and leading to a failure in DOSH ICOP IAQ 2026 hygiene audits.

At EKG M&E Sdn Bhd, we utilize advanced sealing technologies to close the "Energy Gap," ensuring your facility maintains Airtightness Class 6 (ATC 6) compliance.

---

The 2026 Gap-Sealing Mandate

Under the latest Malaysian standards, simply using "duct tape" is no longer acceptable for commercial compliance.

• The 1% Threshold: New 2026 codes require that total leakage from all gaps be less than 1% of the system's total airflow.

• The Health Impact: Gaps in return air ducts act like a vacuum, sucking in dust, mold spores, and humidity from contaminated ceiling plenums. This is the #1 cause of failing the 500 cfu/m³ bacterial ceiling required by DOSH 2026.

---

Advanced Gap Sealing Methods

We utilize a tiered approach depending on the size and accessibility of the gaps.

1. Aerosolized Internal Sealing (The "No-Access" Solution)

For gaps hidden behind fixed ceilings or within mechanical shafts, we use aerosol technology (like Aeroseal).

• The Logic: A non-toxic vinyl acetate polymer mist is injected into the pressurized duct. The particles naturally seek out gaps and bond together to "bridge" openings up to 15mm.

• The Benefit: Zero demolition. We seal the gaps from the inside out without breaking a single plaster tile.

2. High-Velocity Fiber-Reinforced Mastic

For visible gaps and irregular seams, we apply professional-grade mastic.

• Tropical Resilience: Our mastics are specifically selected for the Malaysian climate—they remain flexible and do not crack under the extreme thermal expansion and humidity of the Klang Valley.

• Structural Strength: For gaps larger than 5mm, we utilize fiberglass mesh reinforcement embedded in the mastic to create a permanent, hermetic seal.

3. Liquid-Applied Gaskets (ATC 6 Standard)

On all transverse joints and flanges, we apply liquid-applied gaskets. This creates a "metal-to-metal" air-tight seal that far exceeds the performance of traditional rubber gaskets, which can dry out and fail over time.

---

Performance Matrix: Standard vs. EKG Gap Sealing

Feature	Legacy Sealing (Tape/Basic)	EKG Gap Sealing (ATC 6)
Leak Reach	Only visible/accessible gaps	100% of the network (Inside-out)
Airtightness Class	Variable (Class 1 or 2)	Verified Class 6 (ATC 6)
Gap Bridge Size	Small/Flat only	Up to 15mm (Aerosol) / 25mm+ (Mastic)
Durability	High risk of peeling	Permanent / Flexible Bond
EECA 2024 Status	Risk of Non-compliance	Audit-Ready / 5-Star Potential
IAQ Safety	Moderate (Plenum Aspiration)	High (Hermetic Delivery)

---

Why Choose EKG M&E Sdn Bhd?

• Total 3D BIM Coordination: We model your duct transitions in 3D to identify "high-stress" joints where gaps are most likely to form, allowing for proactive reinforced sealing.

• Certified Digital Reporting: Every project concludes with a Certificate of Airtightness. This includes a real-time graph of your leakage reduction, essential for your Registered Energy Manager (REM) and official ST (Energy Commission) audits.

• 34 Years of Engineering Depth: We understand the unique psychrometrics of Malaysia, ensuring your gaps are sealed against both air and moisture.

Is your AC system "bleeding" energy through hidden gaps? Contact EKG M&E Sdn Bhd today for a professional air duct gap sealing audit and secure the efficiency and health of your facility.