Details

---

BOMBA Compliant Stainless Steel (SS) Fire Ducting by EKG M&E Sdn Bhd

In the high-density urban corridors of Kuala Lumpur and Selangor, fire safety in mechanical systems is governed by the Uniform Building By-Laws (UBBL). While galvanized iron is the standard, BOMBA Compliant Stainless Steel (SS) Fire Ducting is the premium choice for mission-critical environments where corrosion resistance and extreme fire integrity must coexist. EKG M&E Sdn Bhd provides specialized SS fire-rated systems engineered to contain smoke and toxic gases while withstanding the intense thermal stresses of a structural fire.

---

The Engineering of Stainless Steel Fire Integrity

Stainless steel possesses a higher melting point and superior structural stability at high temperatures compared to standard carbon steel. When combined with certified fire-rated enhancements, it becomes a formidable barrier against fire spread.

1. High-Temperature Material Performance

We utilize Grade 304 or 316 Stainless Steel to ensure the ductwork survives both the fire and the corrosive environments common in industrial plants or commercial kitchens.

• Thermal Stability: Stainless steel maintains its mechanical strength longer than GI when exposed to a "Standard Fire Curve." This prevents the duct from collapsing or sagging, which could otherwise block evacuation routes or fail to extract smoke.

• Corrosion Resistance: Unlike GI, which relies on a zinc coating that can melt or off-gas in a fire, stainless steel is an alloy that provides consistent performance without the risk of surface degradation during high-heat events.

2. Passive Fire Protection (PFP) Integration

To achieve full BOMBA certification, the SS ducting must be integrated with specialized fire-stopping and insulation systems.

• Intumescent Cladding & Coatings: We apply certified fire-rated wraps or coatings to the SS ductwork. In the event of a fire, these materials expand to provide "Integrity" (preventing flame passage) and "Insulation" (preventing heat transfer to the non-fire side).

• Fire-Rated Hangers & Supports: A fire-rated duct is only as good as its support system. We install heavy-duty stainless steel hangers that are specifically sized to handle the expanded weight of the ducting during a fire event.

---

Critical Operational & Safety Benefits

As an HVAC and Fire Safety Specialist, EKG ensures your SS fire ducting delivers maximum life safety:

• Life Safety & Smoke Extraction:

  The primary role of these ducts is Smoke Spill. In high-rise buildings in the Klang Valley, these systems ensure that corridors and stairwells remain clear of toxic smoke, providing occupants with a safe path for evacuation.

• TNB Energy Efficiency (The Indirect Benefit):

  Fire-rated insulation often has high thermal resistance ($R-value$). By preventing heat gain from hot ceiling voids, your chilled air stays colder. This allows your Variable Frequency Drive (VFD) to run fan motors at lower frequencies (Hz), contributing to a lower monthly TNB electricity bill.

• EECA 2024 & Insurance Compliance:

  Meeting BOMBA standards is a mandatory requirement for building safety audits under the Energy Efficiency and Conservation Act (EECA) 2024. Utilizing certified SS fire ducting also ensures your facility remains compliant with fire insurance policies, protecting your long-term assets.

---

Performance and Safety Matrix

Feature	Standard SS Ducting	EKG BOMBA-Compliant SS Fire Ducting
Fire Rating	Non-combustible (No Rating)	Certified 1 to 4 Hours (Integrity/Insulation)
Melting Point	High (~1400°C)	High + Structural Reinforcement
Smoke Containment	Standard Seals	Airtight / Smoke-Tight Fire Seals
Regulatory Status	General Ventilation	BOMBA / UBBL Approved for Fire Zones
Application	High-end IAQ / Design	Kitchen Exhaust / Smoke Spill / High-Risk Zones

---

Why Choose EKG M&E Sdn Bhd?

• Total BOMBA Submission Support: We provide all necessary test reports (such as BS 476 or EN standards) and technical data sheets required to clear your building’s fire safety inspections.

• Precision TIG Welding: For high-integrity fire ducting, we utilize TIG welding on SS seams to ensure a liquid-tight and smoke-tight seal that far exceeds standard mechanical locks.

• Strategic Selangor Support: Based in Kuala Lumpur, we provide turnkey fire-rated SS ducting services for hospitals, data centers, oil & gas facilities, and luxury high-rises across the region.

Is your building's smoke spill system robust enough to meet current BOMBA standards? Contact EKG M&E Sdn Bhd today for a professional fire ducting audit and technical proposal.