Details

---

Pressurization System Compliance Certification | BOMBA & UBBL Standards by EKG

In Malaysia, Pressurization System Compliance Certification is the legal validation that your building’s smoke control measures—specifically Staircase and Lobby Pressurization Fans—will function during a fire. This is a mandatory requirement for the annual renewal of your Fire Certificate (FC) issued by Jabatan Bomba dan Penyelamat Malaysia (BOMBA).

As part of a Ventilation Systems Audit, EKG provides the rigorous Testing & Commissioning (T&C) required to move your building from "Non-Compliant" to "Certified."

---

1. The Legal Framework: UBBL & MS 1472

Compliance isn't a suggestion; it's governed by strict engineering codes:

• Uniform Building By-Laws (UBBL): Requires all high-rise buildings over 18 meters to have pressurized escape routes.

• MS 1472 (Malaysian Standard): Dictates the precise pressure levels and air velocities required.

• The "Notice of Non-Compliance": If your fans fail their annual test, BOMBA can withhold your FC, leading to insurance invalidation and potential legal action against building management.

---

2. The EKG "Certification-Ready" Audit Protocol

We perform the exact measurements that BOMBA officers look for during an inspection:

• Differential Pressure Mapping (The 50 Pa Target): We use calibrated digital manometers to prove the stairwell maintains a minimum of 50 Pascals of positive pressure. This ensures smoke cannot "leak" into the escape path.

• Door Opening Force Test (The 110N Limit): Safety is a balance. If the pressure is too high, the fire doors become impossible to open. we use a force gauge to ensure no door requires more than 110 Newtons of force to operate.

• Air Velocity Check (The 1.0 m/s Barrier): When a fire door is opened, the fan must provide an air "blast" of at least 1.0 meter per second to physically push smoke back.

• VFD Fire-Mode Validation: We verify that the Variable Frequency Drive (VFD) is set to "Override" mode, bypassing all standard motor protections to ensure the fan runs until the fire is extinguished.

---

3. The Energy & Mechanical Impact: The Cube Law

A "Compliant" system should also be an efficient one. Many buildings pass their certification by simply running fans at 100% speed, which wastes energy and stresses the motor.

• Friction Identification: A fan with worn bearings or misaligned belts draws significantly more power to hit its 50 Pa target.

• The Logic: Because of the Cube Law, a mechanically "slick" fan can hit its compliance targets at a lower frequency (Hz).

By restoring mechanical efficiency, we can often reduce VFD speed by 15%, which cuts the power consumption during monthly testing by nearly 40%.

---

4. Certification Checklist (BOMBA Witness Readiness)

Test Parameter	Compliance Target	Consequence of Failure
Static Pressure	$50 \text{ Pa}$ (+/- $10\%$)	Smoke Ingress / FC Rejection
Door Force	Max $110 \text{ Newtons}$	Safety Hazard (Entrapment)
Response Time	Full Speed in $< 60$ Sec	Smoke accumulation in exits
Phase Rotation	Correct (Pushing Air)	Fan Sucking Smoke (Dangerous)
Genset Backup	$< 10$ Sec Changeover	Total System Failure during Blackout

---

5. Why Trust EKG for Compliance Certification?

• Form G Documentation: We provide the comprehensive technical reports and "Form G" witness logs required for your Professional Engineer (PE) or BOMBA submission.

• Mechanical Restoration Path: If you fail your initial test, we don't just leave you with a report. We are experts in Mechanical Fan Overhauls, offering on-site dynamic balancing, bearing replacements, and motor repairs to get you back to compliance.

• VFD ROI Projection: We optimize your fan settings to ensure "Precision Pressurization," saving energy while maintaining 100% safety.

• 2026 KL Standards: We stay ahead of the latest Malaysian Fire Protection Association (MFPA) guidelines to future-proof your building.