Details

---

Warehouse Make-up Air Units (MAU) by EKG M&E Sdn Bhd

In any industrial ventilation strategy in Kuala Lumpur or Selangor, a Make-up Air Unit (MAU) is the essential "counter-balance" to your exhaust fans. If your warehouse only has extraction fans (spilling air out) without a dedicated intake system, you create a vacuum that causes "Negative Pressure." This leads to whistling doors, high infiltration of KL street dust, and increased cooling loads.

EKG M&E Sdn Bhd engineers MAU systems to ensure your building maintains a "Balanced Lung," providing filtered, tempered air to replace exactly what is exhausted.

---

1. The Engineering of Building Pressure

The primary function of an MAU is to maintain Positive Pressure.

• The Logic: We calibrate the MAU to provide roughly 10% more air than the total exhaust volume.

• The Result: When a loading bay door opens, air flows out of the warehouse. This physically prevents humid outside air, insects, and vehicle fumes from being sucked into your clean storage zones.

2. MAU System Components

As an HVAC and Clean Air Specialist, we treat the MAU as the first line of defense for your Indoor Air Quality (IAQ).

A. Multi-Stage Filtration

Unlike a simple hole in the wall, an MAU uses a filter bank. We typically install G4 Pre-filters followed by F7 Secondary filters to capture urban pollutants and PM2.5 before the air enters your facility.

B. Variable Frequency Drive (VFD) Control

We integrate VSD/VFDs into every MAU motor. This allows the unit to communicate with the exhaust fans. If an exhaust fan is turned off, the MAU automatically ramps down to prevent over-pressurizing the building, saving significantly on your TNB electricity bills.

C. Cooling and Dehumidification (Optional)

In sensitive warehouses (Pharma or Electronics), the MAU can be equipped with a cooling coil. This "tempered" air ensures that the fresh air being brought in doesn't spike the internal temperature or humidity of the warehouse.

---

3. Solving the "Negative Pressure" Crisis

Without a properly sized MAU, a warehouse in the Klang Valley will experience:

• Infiltration: Hot, wet air leaks in through every gap in the building envelope.

• Back-drafting: Exhaust fumes from forklifts or nearby factories can be sucked back into the warehouse.

• Door Issues: High-velocity air whistling through door seals, making them difficult to open or close properly.

---

MAU Performance Matrix

Feature	Passive Louvers / Gaps	EKG M&E Powered MAU
Pressure Control	Negative (Uncontrolled).	Positive (Shielded).
Filtration	None (Dust enters).	High (G4/F7 Medical Grade).
Air Distribution	Localized near doors.	Uniform (via Ducting/Jet Fans).
Energy Efficiency	Low (Increases AC load).	High (VFD/Tempered Control).

---

Why Choose EKG M&E Sdn Bhd?

• Air Balancing & Commissioning: We use calibrated manometers to perform a Pressure Differential Test, proving your warehouse is maintaining the correct positive pressure in "Real-World" conditions.

• Total System Integration: We ensure your MAU is interlocked with your Fire Alarm (BOMBA) system to shut down or switch to "Smoke Spill" mode during an emergency.

• Klang Valley Strategic Support: Based in Kuala Lumpur, we provide turnkey design, rooftop structural mounting, and scheduled maintenance for the region's leading logistics hubs.